Thursday, November 28, 2013

Guest Post - Choosing the right baby gate!


 

 At Diaper Days we know how important safety is especially once your little one is on the move. As babies begin to crawl and walk gates become an essential safety feature in most homes. We also know that there is nothing more frustrating than buying a gate and taking it home only to find that it does not fit. You can avoid this problem by being prepared ahead of time. Before shopping for a gate, measure the opening accurately. Be aware of what you will be mounting the gate to. And, take note of whether the gate can be mounted to a surface that allows the gate to be placed straight across the opening, or whether it will be mounted on an angle.

If you are pressure mounting a gate, consider how often you will need to walk through the gated area. In a high traffic area, you may want to consider a swinging gate. Many people hurt themselves and their babies while trying to step over pressure mounted gates that do not have a swinging door. If you are placing a pressure mounted gate against drywall, you may want to mount a piece of wood to the wall so that the gate does not leave an indent in the wall over time.

Some pressure mounted gates can be mounted against the spindles on a staircase when placing the gate at the bottom of a staircase. Remember, pressure mounted swing gates always have a bar across the bottom. If you are using a gate at the bottom of the stairs, you will want to make sure that the gate can be mounted against the bottom stair or at the back of the first step up.

Although you may dread the thought of screwing a gate into your banister, a pressure mounted gate should never be used at the top of a staircase. Not to worry though, we have a solution for this as well.

If you are looking for a gate that will be hardware mounted, you will need to consider how you will mount the gate. We have mounting kits that attach to the banister post without damaging the wood. If you are mounting the gate to drywall, you will want to mount a piece of wood on the wall and mount your gate to it. The piece of wood needs to be mounted using a butterfly anchor or directly to a stud.

If you can't mount the gate straight across the opening, you need to make sure that you select a gate that can be mounted on an angle. You will also need to consider how much space you have to swing the gate. If space is limited, we have gates that roll in and out of their wall mount instead of swinging like a door. This type of gate is also great for grandparents who do not want to leave a gate out when little ones are not around.

We also have specialty gates that will span large openings, awkwardly shaped areas, and fireplace hearths. We have gates that will fit almost anywhere you need them to!

If you have a difficult gate placement, you can email a picture of the gate, location and mounting area to info@diaperdays.ca, and we will give you some advice in advance.


Photobucket

No comments:

Post a Comment